ADD TO QUOTE PAGE
Specify your selection below and add the product to your quote page.
Earth Drills For Excavators 21T–50T (Up to 152319Nm)
Earth Drill 100,000 MAX and 150,000 MAX are part of the heavy duty range in the Auger Torque product line up – suitable for excavators between 21T- 50T.
Having surveyed the market & through our frequent and direct collaboration with operators specialising in large screw pile and hard rock drilling applications we are excited to release the Earth Drill 100,000 MAX and 150,000 MAX globally. A perfect choice for excavators between 21-50T, this drive unit is geared towards high torque applications. With a weight of just over 1T (1.5T for 150MAX) we have managed to keep the weight down for versatility whilst not sacrificing any of the robustness our drives are renown for. Running a massive 150mm HEX shaft we are confident it will stand up to the toughest of applications time & time again.
Earth Drills For Excavators 21T–50T (Up to 152319Nm)
Earth Drill 100,000 MAX and 150,000 MAX are part of the heavy duty range in the Auger Torque product line up – suitable for excavators between 21T- 50T.
Having surveyed the market & through our frequent and direct collaboration with operators specialising in large screw pile and hard rock drilling applications we are excited to release the Earth Drill 100,000 MAX and 150,000 MAX globally. A perfect choice for excavators between 21-50T, this drive unit is geared towards high torque applications. With a weight of just over 1T (1.5T for 150MAX) we have managed to keep the weight down for versatility whilst not sacrificing any of the robustness our drives are renown for. Running a massive 150mm HEX shaft we are confident it will stand up to the toughest of applications time & time again.
You may also like…
-
Earth Drills For Excavators 2T–5T (Up to 4499Nm)
View Product -
Earth Drills For Excavators 4.5T–8T (Up to 8152Nm)
View Product -
Earth Drills For Excavators 8T–15T (Up to 15071Nm)
View Product -
Earth Drills For Excavators 12T–22T (Up to 24755Nm)
View Product -
Earth Drills For Excavators 20T–45T (Up to 66589Nm)
View Product -
Earth Drills For Excavators 21T–45T (Up to 80898Nm)
View Product -
Earth Drills For Mini Loaders (Up to 2847Nm)
View Product -
Earth Drills For Skid Steer Loaders Up to 80HP (Up to 4499Nm)
View Product -
Earth Drills For High Flow Skid Steer Loaders & Telehandlers (Up to 8152Nm)
View Product -
Earth Drills For Backhoes (Up to 1507Nm)
View Product -
Earth Drills For Truck Cranes (Up to 6819Nm)
View Product -
Earth Drill Range: Hitches and Frames
View Product
-
SPECIFICATIONS
MODEL 100000 MAX 150000 MAX Suitable for Excavators 21-50t 21-50t Oil Pressure Range 160 - 350 Bar (2321 - 5,076 psi) 160 - 340 Bar (2,321 - 4,931 psi) Torque Range 45,746 - 100,069 Nm (33,741 - 73,807 ft-lb) 71,680 - 152,319 Nm (52,868 - 112,344 ft-lb) Oil Flow Range 100 - 280 lpm (26.4 - 74.0 gpm) 100 - 340 lpm (26.4 - 89.8 gpm) Speed Range 5 - 15 rpm 4 - 12 rpm Hub Options 150mm Hex 150mm Hex Height 1,623 mm (63.90in) 1,863mm (73.35in) Diameter 636mm (25.04in) 766mm (30.16in) Weight 1061 kg (2,339 lbs) 1,491 kg (3,287 lbs) Hitch Options Double Pin Cradle Hitch Double Pin Cradle Hitch Valve Options 2 Way Valve - Converts single acting hammer into a 2 way auxiliary flow 2 Way Valve - Converts single acting hammer into a 2 way auxiliary flow -
FEATURES
Auger Torque’s Earth Drills are built to the most exacting standards using only high quality materials and the latest manufacturing techniques available.
-
150mm Hex Shaft
The driveshaft is crucial for reliability and it goes without saying that the bigger the better applies here. A shaft is always stronger when machined as a hex and the 150mm diameter is the largest in the industry, especially when looking at compatibility on machine as small as 21T.
-
Axial Piston Motor
Axial Piston Motors allow us to run a single speed motor. By using an axial piston motor with our drive we can have a high speed motor but still achieve high torques through the gearbox multiplication. At maximum flow we achieve 15 rpm.
-
Single Piece Non-Dislodgement Shaft
As standard with all of our auger & screw pile drives, our patented single-piece non-dislodgement shaft is of course a standard feature. We are so confident in this must have safety feature that we are covering it with a lifetime warranty.
-
Epicyclic gearbox
Torque is amplified by using the unique Auger Torque planetary gearbox. This system allows the motors output torque to be multiplied with extreme efficiency as well as ensuring the durability and reliability you need.
Features
- Up to 100,069 Nm of Torque
- Up to 15 rpm rotational speed
- Massive 150mm Hex Shaft
- Large main shaft bearings
- Non-Dislodgement Shaft
- Life time non-dislodgement guarantee
- Low-weight at just over 1T
- Single-piece driveshaft
- Compatible with AT Alignment Monitors
- Covered by Auger Torque’s industry leading warranty
Applications
- Large diameter & deep auger drilling
- Hard Rock Auger drilling
- Core barrel drilling
- Pole and mast installations
- Foundation piles
- Large diameter screw pile installations
- Rail applications
- Exploration & research
- Compatible with excavators from 21T onwards allowing for low impact and reasonably tight access application where typically larger machines would have to be used.
-
-
Warranty
LIFETIME WARRANTY
Click here to find out more about Auger Torque’s industry leading lifetime warranty or register your product online.